2016 ACCESSORIES / PRICES
 
Conductivity Accessories

35-COND-1

Polymer body conductivity electrode having a cell constant of 1.0. Probe dimensions are 6L x 0.5D inches (15.2L x 1.27D cm) with 36-inch (.9144 m) cable and BNC connector.

$127.00

35-TS25

Temperature sensor for Conductivity Meter #73, pH models 64 and 68. Sensor dimensiions, 1.0L x 0.16D inch (2.5 cmL x 4 mmD) with 36-inch (.9144 m) cable

$75.00


Oxygen Accessories

Sensor dimensions for the following 600 electrodes are 1.25D x 1.62L inches (3.1D x 4.1L cm)

01-OXANELEC-05

Replacement electrode for Model 600 and 1600 with 5 foot cable (1.5 m)

$136.00

01-OXANELEC-10

Replacement electrode for Model 600 and 1600 with 10 foot cable (3.0 m)

$157.00

01-OXANELEC-15

Replacement electrode for Model 600 and 1600 with 15 foot cable (4.5)

$167.00

01-OXANELEC-20

Replacement electrode for Model 600 and 1600 with 20 foot cable (6.1 m)

$177.00

01-OXANELEC-25

Replacement electrode for Model 600 and 1600 with 25 foot cable (7.6 m)

$188.00

01-OXANELEC-30

Replacement electrode for Model 600 and 1600 with 30 foot cable (9.1 m)

$205.00

01-OX630-ELEC

Replacement electrode for Model 630 and 1630 with 5 foot cable (1.5 m)
Inquire for optional lengths and pricing.

$521.00

01-OXGS-Pump

Pump assembly for moving a small gaseous sample to the oxygen electrode OX630. A special chamber for containing small volumes of gas is included.

$135.00

01-OXGS-NEEDLE

Assembly for injecting a small gaseous sample to the oxygen electrode OX630. A special chamber for containing small volumes of gas is included.

$135.00

Custom cable lengths available upto 100 feet (30.48 m) for all oxygen electrodes. Inquire for pricing.


pH Accessories

01-35-1500

pH combination, gel-filled, polymer body electrode. 5.5 x 0.45 inches, 36-inch (.9144 m) cable with BNC connector (13.97 x 1.14 cm)

$72.00

01-35-TS25

Temperature sensor for pH models 64 and 68. Sensor dimensiions, 1.0L x 0.16D inch (2.5 cmL x 4 mmD) with 36-inch (.9144 m) cable

$75.00

Buffer

pH 4, 7 and 10 in pints, price is per pint.

$16.00

01-36-0001

Soaker bottle for electrode storage

$8.00


Turbidity Accessories

01-TUR-CAP

Turbidity meter chamber cover.

$35.00

01-TUR-FILTER

0.2 micron, disposable filter for syringe.

$8.00

01-TUR-400NTU

400 NTU concentrate; 2 oz. (60 ml) used to make turbidity calibrating solution.

$50.00

01-TUR-SYRINGE

Syringe for filtering water, (50 ML)

$8.00

01-TUR-VIAL

20 x 70 mm, flat-bottom vial with cap for use in the turbidity meter, models 800 and 800P.

$25.00

01-TUR-0NTU

Permanently sealed, polymer secondary standard, 0 NTU for use in calibrating the turbidity meter.

$75.00

01-Tur-10NTU

Permanently sealed, polymer secondary standard, 10 NTU for use in calibrating the turbidity meter.

$75.00

01-LMP-L1006

3.5 volt lamp, rated for 50,000 hours of use in the turbidity instrument.

$65.00

01-ADAPTER-500

110VAC to 9VDC, positive-tip adapter, 9 volts at 500 milliamps DC

$18.00


X-Ray Accessories

01-RMS-37XR

Model 37XR, True RMS Multimeter

$180.00

190-LEADS-623

Red and Black AC leads for use with the XR201/MS.

$18.50


General Accessories

01-ADAPTER-6

A 120 volt AC to 6 volt DC wall adapter.

$19.00

 
  Back to the Products page
  Back to the Home page